Deco Audio Shop
Audio Technica AT-VM95SP 78rpm Cartridge
Audio Technica AT-VM95SP 78rpm Cartridge
The cartridge body produces an output out of both channels (i.e. there's a mono signal coming out of the left and right outputs) so it is recommended that for lowest surface noise a Mono button is used on your amplifier (if available), but it will work into a normal stereo input.
For the serious archiver with a specialised phono preamplifier/equaliser the two channel output allows different combinations to be tried to find the lowest surface noise (i.e. Mono L+R, Mono L, Mono R, LR Variable Mix) which allows professional archivers to minimise noise and distortion by sampling the least damage side of the grooves from an old record.
A 3mil stylus tip is used to minimise surface noise, this is a bonded tip on an aluminium cantilever
Technical Specifications:
Frequency Response: 20 - 20,000 Hz
Vertical Tracking Angle: 23°
Vertical Tracking Force: 4.5 to 5.5g (standard 5.0g)
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000 Ω
Coil Impedance: 3.3 kΩ (1 kHz)
DC Resistance: 485 Ω
Coil Inductance: 550 mH (1 kHz)
Output Voltage: 2.7 mV (@ 1 kHz, 5 cm/sec)
Output Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: SP 3 mil Conical Bonded
Cantilever: Aluminium Pipe
Static Compliance: 12 x 10 – 6 cm / dyne
Dynamic Compliance: 2 x 10 – 6 cm / dyne (100 Hz)
Mounting: 1/2” centres
Cartridge Weight: 6.1g
Dimensions: 17.2 x 18.9 x 28.3 (HxWxD mm)
Accessories Included: Two 11 mm installation screws; Two 8 mm installation screws; Two washers
Model: AT-VM95SP
Recommended Load Capacitance: 100-200 pF
Replacement Stylus: AT-VMN95SP
Stylus Size: 3 mil
Type: VM Stereo Dual Magnet
Wire Used for Coil: T.P. Copper